PATIKIL 40mm/1.6inch Pressure Sensitive Seal, 500 Pack

Application: Foam lid liners are coated with a torque-activated coating, after tightening the lid, they can be adhesive to glass, plastic and metal jars, as well as round containers with metal or plastic lids and closures. NOTE: 1. Please make sure the right size you need before ordering. 2. Once the seal is removed, the tightness will be affected when reused. 3. These pressure-sensitive liners are best used with powder or dry products, not suitable for applications containing oil; Avoid overfilling the container. 4. It is recommended to wait enough time before removing the cover after installation. 5. These PS foams are not suitable for use at high temperatures. Best Sbc Power Steering Pup Bracket Where to Buy? TD-Pup.co Application Foam lid liners are coated with a torque-activated coating, after tightening the lid, they can be adhesive to glass, plastic and metal jars, as well as round containers with metal or plastic lids and closures.Instruction 1. Keep the cap where the seal needs to be attached clean, make sure there are no water spots and oily residues; 2. Put the lettering side of the seal into the cap and apply a little pressure to attach it tightly; 3. Finally, Screw the lid on as tightly as you possibly can, the seal is activated by the pressure of applying the lid and will adhere within 12-24 hours (No Strong Stickiness).Note 1. Once the seal is removed, the tightness will be affected when reused. 2. These pressure-sensitive liners are best used with powder or dry products, not suitable for applications containing oil; Avoid overfilling the container. 3. It is recommended to wait enough time before removing the cover after installation. 4. These PS foams are not suitable for use at high temperatures. Size: 53mm x 1mm / 2.09inch x 0.04inch (Dia x T); Packing List: 150 x Pressure Sensitive Liners. PATIKIL 53mm/2.09" Foam Lid Liner, 100 Pack PS Foam Resistant Tamper Pressure Sensitive Seal for Bottle Cap Liners Seals Pressure Sensitive Torque Activated Seals Cap Liners - 53 mm (2.09) -50 PCS -Made in USA- for Glass & Plastic Bottles & Containers - No Induction Sealer Needed No induction sealers or heat shrink bands needed with these liner seals. This foam seal peels easily from the container When you need to open. Heat Resistant Foam PATIKIL 40mm/1.6inch Pressure Sensitive Seal, 500 Pack 58 Mm Tamper Advantage: The pressure-sensitive seal which is made of polystyrene foam material effectively avoids dust, moisture and dirt into the jar and prevents leaks and odors in the bottle so that it can keep the dry or powder products fresh at all times. The outer diameter of the bottle mouth is consistent with the diameter of the product No tools or heat gun required.